Who knew you could make a cool coffee table from recycled wine bottles?

Who knew you could make a cool coffee table from recycled wine bottles?


In this day and age, it is important to be mindful of the environment and look for ways to reuse materials. An easy and stylish way to do this is to upcycle wine bottles and turn them into an awesome DIY coffee table. Read on to learn how you can make your own unique coffee table from recycled wine bottles!

What You’ll Need

Before you can get started, you will need to gather a few supplies. Here is a list of the materials you will need for this project:

  • 4-6 wine bottles
  • Wooden board
  • Plywood
  • Tape measure
  • Table saw
  • Sandpaper
  • Wood glue
  • Newspaper
  • Paint brush
  • Wood stain
  • Polyurethane

Preparing the Wine Bottles

The first step is to prepare the wine bottles that you will be using. Start by removing the labels from the bottles. This can be done by soaking the bottles in hot water and using a scraper to remove the labels. Once the labels are removed, use a glass cutter to cut the bottle in half. Make sure to wear safety glasses and gloves when doing this.

Cutting the Board

Once the bottles are prepared, it is time to cut the board. Measure the board and mark where you need to cut. Use a table saw to cut the board to the desired size. Make sure to use safety equipment when using the table saw.

Sanding and Staining

Once the board is cut, you can start sanding and staining the board. Start by sanding down the board with a fine-grit sandpaper. Once the board is smooth, use a paint brush to apply the wood stain. Allow the stain to dry before proceeding.

Applying the Polyurethane

Once the board is stained, you can apply the polyurethane. Start by laying down newspaper or a drop cloth on the work surface. Use a paint brush to apply the polyurethane in even strokes. Allow the polyurethane to dry before proceeding.

Assembling the Table

Once the board is ready, it is time to assemble the table. Start by laying out the wine bottles on the plywood. Make sure that the bottles are evenly spaced. Use wood glue to attach the board to the plywood. Allow the glue to dry before proceeding.

Adding Feet

Once the board is attached, you can add feet to the table. Start by measuring and cutting four pieces of wood. These pieces should be slightly longer than the height of the table. Attach the feet to the bottom of the table using wood glue. Allow the glue to dry before proceeding.

Finishing Touches

Once the table is assembled, you can add the finishing touches. Start by sanding down any rough edges. Use a damp cloth to wipe away any dust or debris. You can also add decorative touches like paint, stencils, or decoupage.


Making a cool coffee table from recycled wine bottles is a great way to upcycle materials and create a unique piece of furniture. All you need is some wine bottles, a wooden board, and a few other supplies. With a bit of time and effort, you can create a stylish and eco-friendly piece of furniture that will last for years to come. So why not give it a try and make your own wine bottle coffee table?

Avatar photo

Written by

I'm Nancy Arvel, a passionate blogger and environmentalist. I'm dedicated to reducing waste and helping others learn about the importance of recycling. I have been writing about recycling for over 5 years and have had my work featured on some of the biggest environmental sites. My goal is to make a real difference in the world by educating others about the importance of reducing waste and taking care of our planet. I believe that small changes can make a big difference in the environment, which is why I strive to create content that is both informative and inspiring.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *